Understanding Moisture Risks

Moisture damage in shipping occurs when humidity inside containers or packaging exceeds safe levels, causing mold, corrosion, rust, and packaging collapse.

It is a critical risk factor in any supply chain.

10%
Of Estimated Global Container Cargo
Damaged Annually

The 4-Step Moisture Threat Breakdown

Step 01

Identify Moisture Threats

  • Mold and mildew growth
  • Corrosion and rust formation
  • Warping and collapse of packaging
  • Product deterioration & malfunction
  • Staining, discoloration, and bad odor
Step 02

Understand Causes

  • Mold spores thrive on dampness & nutrients
  • Corrosion catalyzed by water exposure
  • Deformation from weakened packaging
  • Odor & staining reducing product value
Step 03

Recognize Container Risks

  • Temperature fluctuations cause condensation
  • Container rain: ceiling droplets dripping on goods
  • Cargo sweat: inner package condensation
  • Day/night cycles multiply loss
Step 04

Prevent with MoistureX™

  • Absorb excess moisture effectively
  • Maintain humidity safely below dew point
  • Stop container rain and cargo sweat
  • Ensure cargo arrives safe, dry, and clean

What is Container Rain & Why Does It Occur?

Two main conditions lead to container rain: Temperature variations and Excess moisture inside the container.

Shipping in containers is one of the most economical and safe ways to transport cargo globally. However, putting cargo into an enclosed steel box over long ocean voyages introduces a constant, severe risk: moisture damage caused by container rain. This phenomenon occurs when condensation forms inside the steel walls and ceiling of a container, dripping onto goods and causing costly damage. Almost every type of cargo is vulnerable during long voyages.

1. Moisture-Holding Capacity

Warm air holds significantly more water vapor than cold air. During sunny days, air inside closed steel containers expands and absorbs ambient moisture.

2. The Dew Point

When temperatures drop, relative humidity rises to 100%. The dew point is the temperature at which air becomes fully saturated with water vapor.

3. Condensation Process

A drop of just 5°C cools steel walls and ceilings beyond the dew point. Water vapor condenses into droplets and drips onto cargo as container rain.

Container Breathing Insight: A temperature drop of just 5°C is often enough to trigger this process. Because the container's steel ceilings and walls cool the fastest, water condenses there first. Eventually, these droplets accumulate and drip down onto the cargo—this is container rain.


*Every container holds some level of moisture from the moment it is loaded, and no standard shipping container is completely airtight. Throughout a voyage, moisture continuously moves in and out—a process known as "container breathing." While temperature variations are impossible to avoid and costly to mitigate mechanically, excess moisture can be controlled.

The Hidden Moisture Sources

Where does moisture originate if the container appears empty or dry?

During the heat of the day, moisture trapped in floors, pallets, and goods evaporates into the air. This spikes the absolute humidity inside the container, raising the dew point and dramatically increasing the risk of container rain when night falls.


Is the Container Airtight?

No container is truly airtight. However, a container in good condition will only allow air and moisture to transfer slowly.

During a typical voyage halfway around the world, temperatures rise during the day and fall at night. As the air inside expands in the heat, it spills out. As it cools and contracts at night, it pulls in fresh, humid sea air. Always check for holes, damaged doors, and open ventilation holes (which should be taped shut for dry cargo) before loading.

Is the Container Actually Dry?

Even if a container looks empty, it might be holding hidden moisture:

  • Washed containers: A recently washed container can retain significant water, especially in the wooden floorboards.
  • Pallets & Dunnage: Untreated wood packaging releases large volumes of water vapor.
  • The Cargo Itself: Organic and hygroscopic commodities release moisture when temperatures rise.

Types of Moisture Absorbers Used in Containers

Engineered formats matched to space, cargo sensitivity, and route demands

Calcium Chloride Bags

Delivers up to 300% capacity. The gold standard for multi-week ocean shipments.

Silica Gel Sachets

Best suited inside individual retail boxes rather than container-wide protection.

Clay / Bentonite

Low capacity natural mineral. Economical only for short, low-humidity storage.

Liners & Barrier Bags

Combined with desiccants to wrap high-value bulk commodities and raw materials.

Calcium Chloride vs. Silica Gel

Chemical absorption vs. physical adsorption — why chemistry matters on long sea routes

Silica Gel (Adsorbent): Moisture adheres to surface pores. Saturates quickly (~25%) and can release moisture back into cargo as temperature rises.
Calcium Chloride (Absorbent): Chemically bonds with moisture, converting it permanently into an irreversible, leak-proof gel.

Property Calcium Chloride Silica Gel
Absorption Capacity Up to ~200–300% of its own weight ~20–30% of its own weight
Mechanism Chemical absorption (locks water permanently in gel) Surface adsorption (holds water on physical pores)
Re-release Risk Very low — permanently bonded as brine/gel Higher — releases moisture back when warm
Optimal Environment High humidity, long-haul ocean routes Low humidity, short trips, tightly sealed small boxes
Typical Use Shipping containers, bulk freight, large cartons Shoeboxes, electronics, small pharma vials
Key Pros / Cons High capacity, zero leakage, long active lifespan Reusable in small packs, but saturates in days

Where to Place Absorbers & How Many You Need

Placement matters just as much as quantity. Condensation forms first on the coolest surfaces—usually the ceiling and upper walls as temperatures drop at night. Absorbers must be positioned to intercept moisture there and in spaces where the air naturally circulates:

High on Walls

Clip hanging strips to top container lashing rings, spaced evenly along the length.

Between Cargo

Position pole desiccants in empty vertical voids between pallets to capture trapped air.

Top of the Load

Lay flat blanket strips directly across the top surface of palletized goods.

Safe Clearance

Never block doors or vents, and prevent direct touching of moisture-sensitive goods.

20ft Container

  • Normal conditions: ~1.0–1.5 kg total
  • Humid cargo / long voyages: ~2.0–3.0 kg total

40ft Container

  • Normal conditions: ~2.0–3.0 kg total
  • Humid cargo / long voyages: ~4.0–6.0 kg total

Professional Sizing Tip: The most common mistake in ocean logistics is under-dosing. If unsure about transit conditions, choose the higher end of the range — the marginal cost of extra desiccant is negligible compared to an entire container of rejected goods.

Calculate Your Route's Exact Moisture Risk

Our specialists calculate desiccant requirements based on container dimensions, transit routes, and product hygroscopic levels.

Get Sizing Recommendation